luni, 29 decembrie 2008

Philips DVP5990K_55

This is probably the best player with last generation of MTK chip.

So, what's new in my mod firmware:
- New skins for logo and filebrowser
- Filebrowser with scrollbars, font with outline, new icons
- max. 64 char. for file name from CD/DVD, 25 for USB.
- 3 MP3 TAG and jpeg preview in a new position.
- 4 fonts for subtile.
- autoload subtitles
- GoTo. Press "Title" twice and enter "h:mm:ss" to jump to time for "avi" files.
- Option to change colors for subtitles (text, outline or background).
- 16 level for vertical position of subtitles.
- "Load Original subtitles, if not found, load all".
- fix "1 sec. srt bug"
- Wordwrap and reformat.
- DVD Quick Play. Menu is DVD-Video, with option "With menu" and "Without Menu". When second is selected, skip DVD menu and play main movie.
- All mpeg4 menu are in "General Page". Can make change when movie play.
- Full support for unicod (ISO+ Joliet and USB). (Thanks to shoora)

I make 2 distinct version:

If you use Vobsub subtitle (sub/idx), I make a version without patch "Load org then all", because with this patch only first sub/idx is loaded.
So, if you use this type of subtitles use this version:

If no, use this (with patch "Load original subtitle,if not found, load all")

Now about upgrade:

Prepare file for upgrade:
burning Upgrade on CD-R / CD-RW
1. Extract the files by unzipping the rar file. Do not rename the extracted files.
2. Write the extracted files – not the rar file – onto a blank CD-R or CD-RW disc,
using the following settings:

- File System: ISO 9660 + Joliet
- File name length : max11 chars = 8+3 (Level 1)
- Mode : 2/XA
- Character set : ISO 9660 (ISO normal CD-ROM)
- No Multi Session
- Write Speed : Low
- Recording Method: Track At Once
Note: The extracted files should not be placed in a folder on the disc but just in the top level directory (root).
3. Finalize the disc. (The application may do this automatically.)

Apply Upgrade to your DVD Player

1. Power on the set and put in the disc.
2. A message will be displayed on the OSD after the upgrade file is recognized.
3. Follow the instruction displayed on the TV Screen – Press “OK” to upgrade (if applicable)
4. After reading the file, the disc will be ejected.
5. Remove the disc after ejected, but DO NOT close the tray
6. Wait approximately 3-5 minutes for the software to be upgraded
7. The set will restart itself once the upgrade is completed.
8. Upon wake up, please perform a “Default reset” in the Preference page under setup menu

Caution: Do not unplug or power off the set while upgrading in progress.

Upgrading the firmware of your DVD Player (USB)
Important: Remove any discs from the tray before USB device is inserted.
1. Extract the firmware upgrade files from the RAR archive
2. Unzip the files and place the files on a USB flash storage device (at least 64Mb in size).
3. Turn the DVD Player on and when it is running, insert the USB flash storage device.
4. Press 'USB' on the remote control
5. A dialogue will now appear - follow the instructions to update the software of your DVD Player.
6. When player open tray, wait 2 or 3 second and remove stick from USB but DO NOT CLOSE TRAY.
Note: Please make sure you delete the upgrade file from the USB device before using it on the player again. This will prevent the player from performing the upgrade again.

Wait until player close tray and display new logo.
Enter "Setup" and from "Preference Page" perform a “Default reset”.
From "General Page" change font, color and position for subtitle.


See more here


See more here


See more here

Niciun comentariu: